Product Overview
The eFlow102NB power supply/charger converts a 115 VAC/60 Hz input to a 12 VDC at 10 A output. Features Input 120 VAC 60 Hz, 3.5 A12 VDC output10 A continuous supply current Aux. power-limited output rated at 1 A (unswitched)Over Voltage Protection. Filtered and electronically regulated outputs Built-in charger for sealed lead acid or gel type batteries. Maximum charge current 1.54 Automatic switch over to stand-by battery when AC fails Transfer to stand-by battery power is instantaneous with no interruption Supervised Fire Alarm disconnect (latching or nonlatching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger AC fail supervision (form C contacts)Battery fail and presence supervision (form C contacts)Low power shutdown. Shuts down DC output terminals if battery voltage drops below 80% of nominal. Prevents deep battery discharge Green AC Power LED indicates 120 VAC present. AC input and DC output LED indicators Short circuit and overload protection.
Main Features
- Input 120V AC 60 Hz, 3.5 A
- 12V DC output
- 10 A continuous supply current
- Aux. power-limited output rated at 1 A (unswitched)
- Over Voltage Protection
