The Viking model PA-250-IP SIP/Multicast Paging Amplifier provides up to 250 Watts of loud paging for SIP based VoIP phone systems (hardware or hosted/cloud based service provider). The PA-250-IP can be used for standard SIP endpoint paging or multicast paging.
The PA-250-IP can drive up to two hundred fifty (250) 70V speakers and/or paging horns (each speaker set to "1 Watt tap"). The small 1U rack size chassis is possible because the PA-250-IP uses new amplifier technology that is 3 times more efficient than old designs competitors use. The high efficiency of the PA-250-IP means much less heat dissipation, smaller size, higher reliability, and lower cost.
There are many advantages of using a 70V distributed audio paging system, such as being able to put more speakers on a wire run, having longer speaker wire runs, using smaller gauge wire, and being able to set the volume of each speaker independently
The PA-250-IP features individual level controls with LED indicators for each input, automatic peak limiting, multiple amplifier protection modes, an adjustable Automatic Level Control, and Bass & Treble Controls.
The unit easily connects with a single CAT5/6 cable from your network switch. The night ring feature is programmable for time of day and day of week to enable loud ringing for after hour incoming calls.
A 600 Ohm output to allow more paging amplification to be added if needed. The PA-250-IP has inputs for Background Music and Aux Input. The Aux Input allows the addition of another audio source such as a clock-controlled tone generator (Viking model CTG-1A or CTG-2A), or emergency notification system (Viking model DNA-510).
Features
SIP compliant
SIP endpoint or multicast group member
SIP/Multicast: SIP page, SIP page and zoned multicast receive
Plays audio from standard multicast sources
Compatible with Polycom multicast paging
Red "Page/Status" LED indicator
Network downloadable firmware
Support for access code to prevent unwanted SIP calls
Network remote volume control
Paging prioritization
Programmable pre-page alert tone
Powerful 70V amplifier drives up to 250 Watt load
Door chime trigger input
Auxiliary and background music inputs
Individual and master volume controls
Bass and treble controls
LEDs show audio level and activity
Provides loud ringing
600 Ohm output to drive additional amplifiers
Adjustable Automatic Level Control
Peak limiter and multiple protection modes
Applications
Amplified SIP endpoint or multicast IP paging for: schools, hospitals, retail stores, office spaces, etc.
Provide multicast background music and sound masking
Paging systems requiring up to 250 speakers
Installations that can utilize the below advantages of a 70V distributed audio system:
- Longer wire runs using smaller gauge speaker wire to save costs
- Many speakers can be connected on the same wire run to save costs
- Set each speaker's volume individually using its own power taps
Main Features
SIP compliant
SIP endpoint or multicast group member
SIP/Multicast: SIP page, SIP page and zoned multicast receive
General Information
Name: Viking PA-250-IP SIP/Multicast Paging Amplifier, 250W
Category: Viking Electronics, Pro AV, Commercial Audio, Pro Amplifiers
UPC Code: 615687227789
Country of Origin: United States. Country of origin is subject to change.
