The Telguard TG-7FE Universal Dual Path Commercial Fire Cellular Alarm Communicator offers the best in fire alarm communications by providing two separate pathways to reliably transmit signals; a wired LAN connection to the Internet and 5G LTE-M cellular. The Telguard TG-7FE (designed for AT&T) can work as a dual path communicator prioritizing LAN or Cell, as well as work as a sole path cellular device that meets UL 864 requirements. The always-active cellular connection ioffers nationwide coverage on the AT&T network, allowing for remote troubleshooting even when internet service is down. In Canada, it uses Rogers, Telus, and Bell Mobility for coverage. It’s highly configurable to meet the requirements of any AHJ, and no one makes a communicator with as many features that works with as many panels and formats.
Main Features
- Certified for use on the AT&T 5G LTE-M network for nationwide coverage
- Dual communication paths - If the Internet connection is interrupted or the LAN goes down
- Powers directly from the fire panel's 12V/24V auxiliary power supply or via plug-in transformer
- Interfaces with panel over a single DACT connection for universal compatibility (use TG-PEM accessory when panel has no DACT)
- Supports virtually all alarm formats using dial capture for universal panel compatibility
- Link Supervision available in 60- and 5-minute frequencies to meet any AHJ requirements for Sole Path connectivity
- Compatible with the TG-PEM for DACT-less connectivity to the panel (Fire Alarm, Trouble, and Supervisory panel outputs)
General Information
Name: Telguard TG-7FE Universal Dual Path, LAN Internet and 5G LTE-M, Commercial Fire Cellular Alarm Communicator, AT&T
Category: Telguard, Fire, Fire Control Panels, Alarm Communicators
UPC Code: 702054304140
Country of Origin: United States. Country of origin is subject to change.
Dual Path Internet and 5G LTE-M Commercial Fire Communicator - AT&T. :Part of the full line of Telguard universal fire communicators, the TG-7FE offers two pathways to reliably transmit signals: a wired LAN connection to the Internet and 5G LTE-M cellular. It operates on panel power or via plug-in transformer, and is available in AT&T or Verizon models.The TG-7FE uses LTE-M bands for 4G and 5G network compatibility , better building penetration, and longest product life.
The world is changing. Copper POTS lines are disappearing, and calls are delivered over the Internet. This is a perfect example of where the TG-7FE steps in. Eliminate all Telco lines and run an Ethernet cable from the TG-7FE to the premises LAN for alarm signal delivery. And, to be sure signals get through to the central station you choose, the TG-7FE instantly falls over to reliable cellular service any time it?s needed. Telguard puts nearly four decades of alarm communications expertise into every UL Listed communicator. You stay in control, with highly configurable options that meet your needs and the requirements of your AHJ.
Product Specification :
- Dual communication paths - If the Internet connection is interrupted or the LAN goes down, always-on 5G cellular will i mmediately step in
- Powers directly from the fire panel's 12V/24V auxiliary power supply or via plug-in transformer (included)
- Uses LTE-M bands for 4G and 5G network compatibility, better building penetration, and longest product life
- Interfaces with panel over a single DACT connection for universal compatibility (use TG-PEM accessory when panel has no DACT)
- Telguard communicators are compatible with more alarm formats than any other brand. The signal will reliably get to the central station
