The Addressable Relay Base 6" (PAD100-RB) is combination sensor base with a relay module included. The base has a locking feature for the sensor that may be used or removed in the field. Once the head is removed, the relay is accessible in the bottom of the unit.
The PAD100-RB provides one form C relay output. The relay is rated for 2A @ 30 VDC, and 0.5A at 125VAC. The PAD100-RB provides for separation of high voltage and non-power limited connections from the power limited Signaling Line Circuit (SLC). The PAD100-RB does not consume an SLC address and does not require an auxiliary power source.
Main Features
- One form C relay as part of the base assembly
- Relay rating: 2A at 30V DC, 0.5A at 125V AC
- Works independent of the sensors attached
- May be mapped to any device connected to the Control Panel
- LED to indicate that the unit is active
- Separation included in the base for high and low voltage and
- power limited/non-power limited connections
- Terminals accept 22 to 12 AWG wire sizes
- Supports Class A, Class X and Class B wiring
- Does not require SLC Loop address
General Information
Name: Potter PAD100-RB Addressable Relay Base
Category: Potter Electric Signal, LLC, Fire, Fire Detection Devices & Accessories, Detector Accessories & Bases
UPC Code: 700217040249
Country of Origin: . Country of origin is subject to change.
