The MPA-Q 8x250 is part of the mid-power tier in the Q-SYS network amplifier portfolio, extending native Q-SYS integration into even more performance and distributed audio applications across hospitality, entertainment, retail and government environments.
- Eight (8) output channels at 250 W per channel
- Lo-Z, Hi-Z, 70 V and 100 V direct drive available on all channels (no bridging or manual switches required)
- Eight (8) analog, line-level audio inputs, fully routable into Q-SYS or direct out
- Two (2) gigabit Ethernet ports for redundant networked audio
- Standalone mode offers ability to switch to available analog inputs if network connectivity drops
- Quick audio restore after a power outage if PoE connection is available
- Four (4) GPI inputs and two (2) NO/NC output relays
- Full-rack width, 2RU form factor and included hardware for rack- or surface-mounting
- Analog Mode bypasses networked audio and creates a fully analog amplifier; front panel display allows basic channel configuration in this mode
- Rightsized for medium-to-large spaces: MPA-Q Series introduces a new mid-power tier to the Q-SYS network amplifier portfolio and is ideal for spaces where high-output amplifiers exceed operational needs, like hospitality and retail facilities, entertainment spaces and larger corporate and government environments.
- Adapt to keep audio flowing: Ensure your audio system stays running with minimal interruptions. If network connectivity drops, MPA-Q Series amplifiers offer the ability to automatically switch the source to available analog inputs to maintain sound continuity. In the event of a power outage, network audio can be restored within seconds if a PoE connection is available.
- Venue-wide audio with Q-SYS: MPA-Q Series network amplifiers extend a seamless Q-SYS experience to even more spaces, delivering native audio routing and control in both distributed and performance audio applications throughout your venue.
- Integrated audio, video and control: MPA-Q Series network amplifiers are driven by the Q-SYS Full Stack AV Platform, which unifies data, devices and a cloud-first open architecture to deliver a fully integrated audio, video and control solution that offers simpler integration and software-based scalability.
| Specifications | MPA-Q 8x250 |
| Amplifier Output |
| Freq response @ 20Hz-20kHz, 8Ω | +0.2 dB / -0.7 dB |
| Output THD+N @1kHz | 0.01%-0.03% typical; 1% max |
| SNR @ 20Hz-20kHz, 8Ω, A-weighted | >112 dB |
| Gain @+4dBu input | 31 dB |
| Damping factor | >160 |
| Analog Inputs (line-level only) | |
| Input dynamic range (unweighted) | >108 dB |
| Input impedence (balanced & unbalanced) @ 1kHz | >11k balanced and >5.5k unbalanced |
| Sample rate | 48 kHz |
| DSP |
| DSP Processing | Gain, Polarity, IIR Filters (HPF, Parametric, Shelf, Array Correction), FIR Filters (1024 taps per channel), Delay (up to 2020 milliseconds per channel), Limiters (narrow-band, RMS, and peak limiters) |
| Output Power | Maximum1 | Continuous2 |
All channels driven
A, B, C, D, E, F, G, H | 100 V | 250 W | 150 W |
| 70 V | 250 W | 150 W |
| 8 Ω | 250 W | 150 W |
| 4 Ω | 250 W | 150 W |
| 2 Ω | 250 W | 150 W |
| Maximum1 | Continuous2 |
Single channel driven
A or B or C or D or E or F or G or H | 100 V | 500 W | 150 W |
| 70 V | 500 W | 150 W |
| 8 Ω | 500 W | 150 W |
| 4 Ω | 500 W | 150 W |
| 2 Ω | 500 W | 150 W |
| Maximum1 | Continuous2 |
2 channels bridged
A+B or C+D or E+F or G+H | 100 V | 500 W | 300 W |
| 70 V | 500 W | 300 W |
| 8 Ω | 500 W | 300 W |
| 4 Ω | 500 W | 300 W |
| 2 Ω | Not supported |
| Environmental |
| Operating temperature range | 32° to 104° F (0° - 40° C) |
| Storage temperature range | -4° to 158° F (-20° to +70° C) |
| Humidity range | 5% - 85% RH |
| Physical |
| Audio I/O connections | Output: 8x channels (Euro 7.62 mm)
Input: 8x channels (Euro 3.5 mm) |
| Networking | 2x 1 Gbps Ethernet ports
LAN A optionally accepts PoE (802.3af Type 1) for quick time-to-audio following a power interruption |
| GPI | 0-3.3V DC Closure |
| Mounting options | Front rack ears come installed for rack mount installation (rack ears can also be used for chassis-supported surface-mounting) |
| AC power input | 100-240 V, 50/60Hz, 5.2-2.8 A |
| Product dimensions (L x W x H) | 15.0 x 19.0 x 3.5 in (381 x 483 x 89 mm) |
| Product weight | 22.9 lbs (10.4 kg) |
| Included accessories | 1x AC mains power cord (country specific)
Removable rack ears for rack- or surface-mounting
4-position 7.62mm pitch Euroblock connectors (Qty 8)
3-position 3.5mm pitch Euroblock connectors (Qty 16)
12-position (2-row) 3.5mm pitch Euroblock connector (Qty 1) |
*All specifications are subject to change without notice.
1. Max Power - 20 ms , 1 kHz sine wave burst; this data is most useful for asymmetrical loading of amplifier channel and maximizing power utilization of the amplifier.
2. Continuous power: 20 Hz - 20 kHz bandwidth, all channels driven with same load; this data is most useful for estimating longer-term power output across all amplifier channels.
