GIVE US A CALL! 1 (800) 363-ALARM (2527)
Free Shipping On Most Orders Over $250 - Some Exclusions Apply
The Honeywell HPF-PS6 is a 6-amp remote power supply and battery charger designed for compatible fire alarm system applications. Part of the Honeywell PS Series, the HPF-PS6 provides 24VDC power for notification appliance circuits (NACs) and other compatible system equipment.
The HPF-PS6 can be connected to compatible 12V or 24V fire alarm control panels or used as a standalone power supply. It supports Class B and Class A NAC configurations, with Class A operation available when the appropriate ZNAC-PS converter card is installed.
The HPF-PS6 also provides auxiliary power for compatible system peripherals and includes an integral battery charger. The cabinet can accommodate two 7 AH or two 18 AH batteries, while the charging system supports batteries up to 33 AH when an external battery cabinet is used.
The HPF-PS6 combines a 6A remote power supply with an integral battery charger. It is designed to provide additional 24VDC power for compatible fire alarm system equipment and notification appliance circuits.
The integrated charger supports compatible lead-acid standby batteries. The power supply provides a maximum charging current of 1.5A and supports battery capacities up to 18 AH inside the cabinet or up to 33 AH when an external battery cabinet is used.
The Honeywell HPF-PS6 provides five output circuits for compatible notification appliance circuit applications. The unit supports Class B operation and can be configured for Class A operation using the optional ZNAC-PS converter card.
The HPF-PS6 supports multiple notification appliance synchronization protocols. Compatible configurations can support synchronized notification appliances from supported manufacturers. Consult the manufacturer's documentation for current compatibility and configuration requirements.
In addition to NAC power, the HPF-PS6 provides auxiliary power for compatible fire alarm system peripherals. Auxiliary power can be configured as constant or resettable for applications such as compatible detectors, annunciators, door holders, and other system equipment.
The Honeywell HPF-PS6 is designed for compatible fire alarm control panel and standalone power supply applications. The unit can be connected to compatible 12V or 24V fire alarm control panels or configured as a standalone power supply.
The HPF-PS6 is also a direct replacement for the FL-PS6/SK-PS6 according to the product documentation. Always verify the specific panel, wiring, battery, and system configuration before ordering or installation.
| Manufacturer | Honeywell |
|---|---|
| Model | HPF-PS6 |
| Series | PS Series |
| Product Type | Remote Power Supply / Battery Charger |
| Power Rating | 6.0A |
| Input Power | 120 VAC, 50/60 Hz, 5.0A maximum |
| Output | 24VDC filtered |
| Output Circuits | 5 |
| NAC Configuration | Class B; Class A with ZNAC-PS option card |
| Battery Type | Lead-acid |
| Float Charge Voltage | 27.6 VDC |
| Maximum Charging Current | 1.5A |
| Maximum Battery Capacity | 18 AH inside cabinet / 33 AH with external cabinet |
| Cabinet Battery Capacity | Two 7 AH or two 18 AH batteries |
| Dimensions | 20.0" H x 14.5" W x 3.5" D |
| UPC | 783008113278 |
| JBJ Product Code | 0H-PS6 |
The HPF-PS Series is documented for compliance with applicable NFPA 72, UL 864, and UL 1481 requirements. The HPF-PS6 is UL Listed under listing number S24562 and is also documented with CSFM, FDNY, and FM approvals.
Listing and approval status can vary by specific model and application. Verify current manufacturer documentation and applicable requirements before installation.
The Honeywell HPF-PS6 may appear under different product identifiers in distributor catalogs and technical documentation.
The HPF-PS6 is identified as a direct replacement for the FL-PS6/SK-PS6. Verify the exact model and system requirements before ordering.
The Honeywell HPF-PS6 is a 6A remote power supply and battery charger from the Honeywell PS Series.
The HPF-PS6 provides up to 6.0A of total continuous output current with 24VDC filtered output for compatible system applications.
The HPF-PS6 provides five output circuits.
Yes. The HPF-PS6 supports Class B NAC operation and can support Class A operation when the appropriate ZNAC-PS converter card is installed.
Yes. The HPF-PS6 includes an integral battery charger with a maximum charging current of 1.5A.
The cabinet can accommodate two 7 AH or two 18 AH batteries. The charging system can support up to 33 AH when a separate battery cabinet is used.
The HPF-PS6 is identified by the manufacturer as a direct replacement for the FL-PS6/SK-PS6. Verify the specific installation requirements before ordering.