Honeywell's HWF2-COM Series LTE / IP fire communicators are single or dual path commercial fire alarm communicators that offer contact ID reporting with any fire alarm control panel (FACP) with a built in dialer. These easy to install communicators offer three selectable reporting paths which include LTE Cellular only, IP only, or IP primary/LTE cellular backup.The HWF2-COM Series LTE / IP fire communicators are single or dual path commercial fire alarm communicators that offer Contact ID reporting with any FACP (fire alarm control panel) with a built-in dialerModels include:HWF2V-COM (Verizon LTE & IP)HWF2A-COM (AT&T LTE & IP)Both models connect directly to the primary or secondary communication ports of a fire panel's digital alarm communicator transmitter (DACT).Three selectable reporting paths include: LTE cellular only, IP only, or IP primary with LTE cellular backup. All signals from the HWF2-COM Series are delivered to the AlarmNet? network control center which routes highly encrypted, cybersecured Ethernet data packets via a customer-provided Internet connection or LTE cellular network to the appropriate central station. The AlarmNet? network control center is fully redundant and monitored 24/7Installation and programming are easy through the AlarmNet 360? website, using the handheld 7720P Programming tool, or using the control panel's programming mode (for panels that support this option)FEATURES & BENEFITS:LTE and IP connection tested every dayThree selectable reporting paths: LTE cellular only, IP only, or IP Primary with LTE cellular backupRequires no change to the existing FACP configurationConnects directly to the primary and secondary telephone ports of a DACTPlan choices range from 5 minute, 60 minute, 6 hour, and 24 hour supervision intervalsOperates over the following communication protocols: LTE, HSPA+(4G) HSPA (3G)Works over any type of customer provided Ethernet 10/100 based network connection (LAN or WAN), DSL model or cable modemData transmits over standard Contact ID protocol but is secured with the industry's advanced encryption standard (AES 256 bit)Supports both dynamic (DHCP) or public and private Static IP addressingReliable connection: IP and cellular connection tested every dayBuilt-in, standalone power supply module. Onboard charging circuit design accommodates battery backup. Includes primary power and battery supervisionDiagnostic LEDs indicate signal strength and statusChoice of LTE provider servicesQOS: Quality of Service diagnostics via AlarmNet conveys vital communicator information including signal strength, message path used, and when the message was received7720P Handheld programmer for easy setup
