D8 power distribution modules provide 8 protected DC outputs for use by a lifesafety system. When used in a single voltage system, each individual voltage output zone may be programmed for a continuous output or to respond to a fire alarm interface for control of egress locks. When used in a dual voltage system, each individual voltage output zone may be programmed for a continuous voltage of either voltage or, to respond to a fire alarm interface for control of egress locks at one of the two system voltages. F8 power distribution modules expand on the D8 capability by adding failsafe, failsecure, and FAI programming to each of the 8 voltage outputs as well as selection of either voltage in a dual voltage system, providing six programming choices per zone. Both the D8 and F8 modules may be used for lock control or power distribution in an access control system and for door holder power in a fire system.
Main Features
Fused or power limited versions
Per zone voltage selection
OutSmart Visual Voltage Verification
F8 also allows selection of constant, enable on FAI, or disable on FAI
Listed for Intrusion and Access Control
Each zone is fused at 3 A or 2.5 A for PTC circuit breakers
PTC versions are low voltage, Class 2 power limited
Allow selection by zone from two voltage sources
Accessory board types include D8 Simple distribution, F8 FAI controlled distribution
General Information
Name: LifeSafety Power D8P-BOXED D8P Auxiliary Power Distribution Module, 2.5A
Category: LifeSafety Power, Batteries & Power Supplies, Power Management, Power Distribution Modules
UPC Code: 8100049112834
Country of Origin: United States. Country of origin is subject to change.
