IToolCo C10K Cannon 10K is a 10,000 pound wire puller. Features a 4 speed dual capstan with a 9 foot and 18 foot per minute on low speed and 20 and 40 feet on high speed. This machine is self contained and ready to pull. Quickly change from side pull to overhead, underground or truck hitch. There is no gang box of parts. Adjustable counter balance for easy setup and a 15 pound working weight. Universal adapter sits on the conduit lock nut, fits a wide range of sizes, and often eliminates the need to use the conduit adapters on lighter pulls. There is no anchoring required, easy to transport, an ergonomic balance point, and is telescoping. User stands to the side during pulls and is easily maneuvers into tight spaces. Overall length is 10 feet 6 inches and width of 30 inches. The open front conduit adapters allow for easy removal at the end of the pull from the top, eliminating the need for any disassembly to pull additional wire. The pivoting arm is for easy rope access on overhead applications. Recommended low stretch pulling rope size 5/8 inch or larger, many use 3/4 or 7/8 inch, minimum breaking strength 15,000 pounds. This Cannon 10K cable puller weighs a total of 282 pounds, a universal adapter for loads under 5,000 pounds, 5 conduit adapters sizes 2 through 4 inches. Powered by a 20 amp, 2 speed coring motor with built in slip clutch and a foot switch.
