C4 and C8 power controller modules provide 4 or 8 relay controlled, protected outputs and 4 or 8 access control inputs. When used in a single voltage system, each individual output may be programmed for a continuous output or to respond to the input from the access control system. A fire alarm interface to over ride the access control system for control of egress locks is provided for each output. When used in a dual voltage system, each individual output zone may be programmed to operate with either of the two system voltages.Product highlightsListed for Fire Alarm, Intrusion, Access Control, CCTV and Mass NotificationProvides 4 or 8 trigger input zones for interface to an access control systemProvides 4 or 8 relay controlled output zonesAccommodates failsafe or failsecure locking devicesProvides fire alarm interface for egress lock controlMonitors fuse integrity of output zones and reports fault to host power supplyStatus LEDs report zone activityEach output zone is fused at 3A or 2.5A for PTC circuit breakersPTC versions are low voltage, Class 2 power limitedAllow selection by zone from two voltage sources
