The NetworxPanel is a secured single-door controller for use within AirAccess, a cellular Cloud-Based Access Control system. The Networx Panel supports standard 26 to 63-Bit format Wiegand Readers (Farpointe, HID, Schlage, Exceed ID). These devices are wired to the dedicated Networx Panel Wireless controller and provide controlled access to a door by releasing a locking device (such as a magnetic lock or electric door strike) when a proper user code or proximity credential is presented. In addition, the Networx Panel is equipped with two relays. One relay should be used for the strike relay and the second relay is an auxiliary relay that can be as a shunt relay. Networx Panel Wireless Single Door Controller (for use with Air Access). 1 to 2-Wiegand Output devices (readers and or Keypads), supports up to 5000 badges. Supports global lockdown, 99 time schedules, 99 access groups and 5-x 30 holidays. Unit shipped in a lockable steel enclosure, 12V power supply with transformer.
Main Features
- Downloadable Firmware loaded to flash memory
- Supports up to 63 networx panels per gateway
- Onboard bi-directional networx radio
- Proximity card formats supported, most formats supported
- Inputs for door position contact to indicate the status of the door
General Information
Name: Napco NETWORXPANEL Wireless Control Panel with 2-Keypads in "Two Door Mode"
Category: Napco Security Technologies, Intrusion, Alarm Control Panels & Keypads, Control Panels
UPC Code: 785026097226
Country of Origin: Dominican Republic. Country of origin is subject to change.
