GIVE US A CALL! 1 (800) 363-ALARM (2527)
Free Shipping On Most Orders Over $250 - Some Exclusions Apply
The Honeywell Home V20PACK is a complete VISTA-20P security control panel kit designed for residential security system installations. The package combines the Honeywell Home VISTA-20P control panel with a 6150 fixed English keypad and essential system components for a convenient installation package.
The VISTA-20P supports both wired and wireless security devices and provides flexible zone expansion for compatible installations. The system supports alarm reporting and upload/download capabilities through compatible IP and cellular communication equipment and is compatible with Resideo Total Connect Remote Services.
The V20PACK includes the VISTA-20P control, 6150 Deluxe Fixed English Keypad, AURORA passive infrared motion detector with pet-immune lens, WAVE2 two-tone indoor sounder, 467 12V 4Ah sealed lead-acid battery, 620 telco connector cord and 621 RJ31X telephone jack.
At the center of the V20PACK is the Honeywell Home VISTA-20P, a flexible security control platform supporting both hardwired and wireless devices. The VISTA-20P provides a broad range of compatible sensor and system options for residential security installations.
The control panel supports multiple system functions and can be expanded with compatible hardwired and wireless modules. This makes the VISTA-20P suitable for installations that may need to grow beyond the devices included in the basic V20PACK package.
The VISTA-20P supports both wired and wireless connectivity, allowing installers to configure systems using compatible hardwired sensors as well as Honeywell Home 5800-series wireless devices and compatible receivers.
Wireless keys can be programmed without using system zones, helping preserve available zones for other security devices.
The VISTA-20P provides alarm reporting and upload/download capability through compatible IP and cellular communication equipment. This gives installers flexibility when configuring communication paths for supported security installations.
The system is also compatible with Resideo Total Connect Remote Services, subject to the required compatible communications equipment, service and system configuration.
The VISTA-20P provides flexible zone capacity for security installations. ADI lists 15 supported zones for the V20PACK product configuration, while the underlying VISTA-20P platform can be expanded with compatible hardwired and wireless expansion modules.
Installers can configure the panel with compatible door, window, motion, environmental and other security sensors according to the requirements of the installation.
The V20PACK includes the Honeywell 6150 Deluxe Fixed English Keypad. The keypad provides a dedicated interface for operating and programming the compatible VISTA-20P security system.
The fixed-display keypad provides convenient access to system status, arming and supported security functions while maintaining a straightforward installation and operating interface.
The V20PACK includes an AURORA passive infrared motion detector with a pet-immune lens. The included detector provides a 35 ft x 45 ft coverage pattern with a 90-degree field of view.
Including a compatible PIR detector in the package provides an additional detection device for installations using the VISTA-20P control panel.
The package includes the WAVE2 two-tone indoor sounder. ADI specifies a 106 dB sound output for the included sounder, providing local audible annunciation for compatible system conditions.
The V20PACK includes a 467 12V 4Ah sealed lead-acid battery along with a 620 telco connector cord and 621 RJ31X telephone jack.
These included components provide commonly required installation hardware for the VISTA-20P security control package.
The V20PACK is built around the Honeywell Home VISTA-20P security control panel and is designed for compatible VISTA security system components.
Important: Compatibility depends on the specific device, expansion module, receiver, communication module and system configuration. Verify the current manufacturer's compatibility requirements before installation.
The Honeywell V20PACK VISTA-20P security kit is designed for residential security system installations and can also be used in compatible commercial applications. Its combination of a security control panel, keypad, motion detector, sounder, battery and connection accessories makes it suitable as a packaged starting point for VISTA-20P installations.
The V20PACK is intended for professional security system installation. The VISTA-20P control, keypad, motion detector, sounder and included accessories should be installed and programmed according to the manufacturer's installation documentation and applicable requirements.
Additional compatible sensors, wireless receivers, expansion modules and communication devices can be added when required by the installation. Verify available zone capacity, auxiliary power requirements and device compatibility during system design.
| Specification | Details |
|---|---|
| Brand | Honeywell Home |
| Manufacturer | Resideo |
| Model | V20PACK |
| Control Panel | VISTA-20P |
| Product Type | Security Control Panel Kit |
| Product Series | VISTA-20P |
| Connectivity | Wired and Wireless |
| Zones Supported | 15 |
| Keypad Included | 6150 Deluxe Fixed English Keypad |
| Motion Detector Included | AURORA PIR, pet-immune lens, 35 ft x 45 ft, 90° |
| Sounder Included | WAVE2 106 dB two-tone indoor sounder |
| Battery Included | 467, 12V 4Ah sealed lead-acid battery |
| Telco Cord | 620 |
| RJ31X Jack | 621 |
| Battery Voltage | 12V DC |
| Alarm Reporting | IP and cellular with compatible communications equipment |
| Remote Services | Resideo Total Connect compatible |
| Graphic Touchscreen Support | Up to four graphic touchscreen keypads |
| Installation | Indoor |
| Application | Residential and compatible commercial installations |
| UPC | 781410203167 |
| Country of Origin | Mexico |
ADI lists the V20PACK with multiple UL, cULus, cETLus and ULC-related certifications and standards, including UL 1023, UL 1610, UL 1635, UL 365, UL 609, UL 985, UL 1037, CAN/ULC-S303 and CAN/ULC-S545.
Always verify the current manufacturer's certification documentation and installation requirements for the specific application.
The VISTA-20P platform can be configured with additional compatible keypads, wireless receivers, motion detectors, door and window sensors, communication modules and automation devices. Choose compatible accessories based on the requirements of the specific VISTA installation.
The Honeywell V20PACK provides a convenient VISTA-20P security control panel kit with a 6150 fixed English keypad, AURORA PIR motion detector, WAVE2 indoor sounder, 467 12V 4Ah battery, 620 telco cord and 621 RJ31X jack. The VISTA-20P supports wired and wireless security devices and provides flexible communication and expansion options for compatible installations.
For installers looking for a complete Honeywell VISTA-20P security kit, the V20PACK combines the core control panel and commonly required installation components into one package.